Laminar flow-based microfluidic systems for molecular interaction analysis-Part 2: Data extraction, processing and analysis.

The rate at which fluorescently-labeled biomolecules, that are flowing at a constant speed in a microfluidic channel, diffuse into an adjacent buffer stream can be used to calculate the diffusion coefficient of the molecule, which then gives a measure of its size. Experimentally, determining the rate of diffusion involves capturing concentration gradients in fluorescence microscopy images at different distances along the length of the microfluidic channel, where distance corresponds to residence time, based on the flow velocity. The preceding chapter in this journal covered the development of the experimental setup, including information about the microscope camera detection systems used to acquire fluorescence microscopy data. In order to calculate diffusion coefficients from fluorescence microscopy images, intensity data are extracted from the images and then appropriate methods of processing and analyzing the data, including the mathematical models used for fitting, are applied to the extracted data. This chapter begins with a brief overview of digital imaging and analysis principles, before introducing custom software for extracting the intensity data from the fluorescence microscopy images. Subsequently, methods and explanations for performing the necessary corrections and appropriate scaling of the data are provided. Finally, the mathematics of one-dimensional molecular diffusion is described, and analytical approaches to obtaining the diffusion coefficient from the fluorescence intensity profiles are discussed and compared.

Laminar flow-based microfluidic systems for molecular interaction analysis-Part 1: Chip development, system operation and measurement setup.

The recent advent of laminar flow-based microfluidic systems for molecular interaction analysis has enabled transformative new profiling of proteins in regards to their structure, disordering, complex formation and interactions in general. Based on the diffusive transport of molecules perpendicular to the direction of laminar flow in a microfluidic channel, systems of this type promise continuous-flow, high-throughput screening of complex, multi-molecule interactions, while remaining tolerant to heterogeneous mixtures. Using common microfluidic device processing, the technology provides unique opportunities, as well as device design and experimental challenges, for integrative sample handling approaches that can investigate biomolecular interaction events in complex samples with readily available laboratory equipment. In this first chapter of a two-part series, we introduce system design and experimental setup requirements for a typical laminar flow-based microfluidic system for molecular interaction analysis in the form of what we call the 'LaMInA system' (Laminar flow-based Molecular Interaction Analysis system). We provide microfluidic device development advice on choice of device material, device design, including impact of channel geometry on the signal acquisition, and on design limitations and possible post-fabrication treatments to redress these. Finally. we cover aspects of fluidic actuation, such as selecting, measuring and controlling the flow rate appropriately, and provide a guide to possible fluorescent labels for proteins, as well as options for the fluorescence detection hardware, all in the context of assisting the reader in developing their own laminar flow-based experimental setup for biomolecular interaction analysis.

On the utility of microfluidic systems to study protein interactions: advantages, challenges, and applications.

Within the complex milieu of a cell, which comprises a large number of different biomolecules, interactions are critical for function. In this post-reductionist era of biochemical research, the 'holy grail' for studying biomolecular interactions is to be able to characterize them in native environments. While there are a limited number of in situ experimental techniques currently available, there is a continuing need to develop new methods for the analysis of biomolecular complexes that can cope with the additional complexities introduced by native-like solutions. We think approaches that use microfluidics allow researchers to access native-like environments for studying biological problems. This review begins with a brief overview of the importance of studying biomolecular interactions and currently available methods for doing so. Basic principles of diffusion and microfluidics are introduced and this is followed by a review of previous studies that have used microfluidics to measure molecular diffusion and a discussion of the advantages and challenges of this technique.

Structure-Function Studies of the Antibiotic Target l,l-Diaminopimelate Aminotransferase from Verrucomicrobium spinosum Reveal an Unusual Oligomeric Structure.

While humans lack the biosynthetic pathways for meso-diaminopimelate and l-lysine, they are essential for bacterial survival and are therefore attractive targets for antibiotics. It was recently discovered that members of the Chlamydia family utilize a rare aminotransferase route of the l-lysine biosynthetic pathway, thus offering a new enzymatic drug target. Here we characterize diaminopimelate aminotransferase from Verrucomicrobium spinosum (VsDapL), a nonpathogenic model bacterium for Chlamydia trachomatis. Complementation experiments verify that the V. spinosum dapL gene encodes a bona fide diaminopimelate aminotransferase, because the gene rescues an Escherichia coli strain that is auxotrophic for meso-diaminopimelate. Kinetic studies show that VsDapL follows a Michaelis-Menten mechanism, with a KMapp of 4.0 mM toward its substrate l,l-diaminopimelate. The kcat (0.46 s-1) and the kcat/KM (115 s-1 M-1) are somewhat lower than values for other diaminopimelate aminotransferases. Moreover, whereas other studied DapL orthologs are dimeric, sedimentation velocity experiments demonstrate that VsDapL exists in a monomer-dimer self-association, with a KD2-1 of 7.4 µM. The 2.25 Å resolution crystal structure presents the canonical dimer of chalice-shaped monomers, and small-angle X-ray scattering experiments confirm the dimer in solution. Sequence and structural alignments reveal that active site residues important for activity are conserved in VsDapL, despite the lower activity compared to those of other DapL homologues. Although the dimer interface buries 18% of the total surface area, several loops that contribute to the interface and active site, notably the L1, L2, and L5 loops, are highly mobile, perhaps explaining the unstable dimer and lower catalytic activity. Our kinetic, biophysical, and structural characterization can be used to inform the development of antibiotics.

Structure of a hyperthermostable dimeric archaeal Rubisco from Hyperthermus butylicus.

The crystal structure of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) from the hyperthermophilic archaeon Hyperthermus butylicus is presented at 1.8 Šresolution. Previous structures of archaeal Rubisco have been found to assemble into decamers, and this oligomerization was thought to be required for a highly thermally stable enzyme. In the current study, H. butylicus Rubisco is shown to exist as a dimer in solution, yet has a thermal denaturation midpoint of 114°C, suggesting that high thermal stability can be achieved without an increased oligomeric state. This increased thermal stability appears to be due to an increased number of electrostatic interactions within the monomeric subunit. As such, H. butylicus Rubisco presents a well characterized system in which to investigate the role of assembly and thermal stability in enzyme function.

Plant DHDPR forms a dimer with unique secondary structure features that preclude higher-order assembly.

Dihydrodipicolinate reductase (DHDPR) catalyses the second reaction in the diaminopimelate pathway of lysine biosynthesis in bacteria and plants. In contrast with the tetrameric bacterial DHDPR enzymes, we show that DHDPR from Vitis vinifera (grape) and Selaginella moellendorffii are dimeric in solution. In the present study, we have also determined the crystal structures of DHDPR enzymes from the plants Arabidopsis thaliana and S. moellendorffii, which are the first dimeric DHDPR structures. The analysis of these models demonstrates that the dimer forms through the intra-strand interface, and that unique secondary features in the plant enzymes block tetramer assembly. In addition, we have also solved the structure of tetrameric DHDPR from the pathogenic bacteria Neisseria meningitidis Measuring the activity of plant DHDPR enzymes showed that they are much more prone to substrate inhibition than the bacterial enzymes, which appears to be a consequence of increased flexibility of the substrate-binding loop and higher affinity for the nucleotide substrate. This higher propensity to substrate inhibition may have consequences for ongoing efforts to increase lysine biosynthesis in plants.